True Cost Guide Garages Install a Driveway

How Much Does Driveway Paving Cost in 2025?

Typical Range:

$2,526 - $7,294

Cost data is based on actual project costs as reported by 22,502 HomeAdvisor members. Embed this data

How We Get This Data

Homeowners use HomeAdvisor to find pros for home projects.

•

When their projects are done, they fill out a short cost survey.

•

We compile the data and report costs back to you.

Updated December 19, 2024

Reviewed by Cati O'Keefe, Expert Home Building & Sustainability Contributor.

Written by HomeAdvisor.

Highlights

Driveway paving costs $2,526 and $7,294, with homeowners paying an average of $4,910.
Gravel driveways have the lowest costs per square foot, while pavers can cost up to $50 per square foot.
Custom designs, premium materials, drainage systems, and other features account for higher costs.
Costs are generally distributed evenly between labor and materials.

On average, installing a new driveway averages $4,910 or between $2,526 and $7,294. A new driveway costs between $8 and $25 per square foot for materials and installation. Premium materials, custom designs, landscaping, and other factors may drive costs higher.

Driveway Paving Cost Calculator

Let's calculate cost data for you. Where are you located?

Where are you located?

ZIP Code

National Average	$4,910
Typical Range	$2,526 - $7,294
Low End - High End	$1,000 - $13,000

Cost data is based on actual project costs as reported by 22,502 HomeAdvisor members.

Find Local Driveway Paver Pros

Driveway Paving Cost Factors

Materials, size, and labor rates are the main cost factors for driveway paving, but custom designs and add-on features also influence your budget.

Size

Contractors typically price driveway paving based on square footage, with costs averaging between $8 and $25 per square foot. The total cost depends on the materials, labor, and time needed for the job.

Driveways range from four to six inches deep—most concrete driveways are four inches, while asphalt driveways are about two to three inches thick. Deeper driveways are potentially necessary if they’re subject to heavy vehicle loads and cold climates, but additional layers equate to more material volume and associated costs.

See this cost breakdown based on common driveway sizes and depths:

Driveway Size (Square Feet)	Description	Cost Range
200	Compact single-car driveway	$1,600–$5,000
300	Small two-car driveway or large single-car	$2,400–$7,500
560	Standard two-car driveway, extra width for easier maneuvering	$4,480–$14,000
640	Spacious two-car driveway with added room for turning or wider vehicles	$5,120–$16,000
540	Two-car driveway with ample maneuvering space, ideal for wider vehicles	$4,320–$13,500
1,000	Large driveway, suitable for multiple vehicles or larger vehicles like RVs	$8,000–$25,000

Material

Driveway paving materials range from $1 to $30 per square foot and represent between 40% and 60% of total costs. Some materials can cost $50 per square foot or more. Each material offers different installation requirements, durability, maintenance needs, and other characteristics that influence total costs.

This table outlines cost ranges for each material based on standard one or two-car driveways.

Material	Cost per Sq. Ft.	Cost Range
Concrete	$8–$18	$960–$8,640
Asphalt/blacktop	$7–$13	$850–$6,240
Chip seal	$5–$10	$600–$4,800
Gravel	$1–$2	$120–$960
Pavers	$10–$50	$1,200–$24,000
Rubber	$10–$25	$1,200–$12,000
Grass	$10–$15	$1,200–$7,200

Concrete

Installing a concrete driveway averages $960 to $8,640. Concrete driveways last up to 40 years with minimal maintenance besides periodic resealing, but they’re prone to cracks in freezing climates. Expect to pay $8 to $18 per square foot, with high costs typically reflecting decorative finishes.

Concrete Finish	Cost Range per Sq. Ft.
Colored	$8–$12
Exposed aggregate	$8–$12
Polished	$8–$12
Stamped	$12–$18
Stained	$18–$20

Asphalt

Installing an asphalt driveway ranges from $850 to $6,240 or $7 to $13 per square foot. Asphalt withstands freezing temperatures and is less likely to crack than concrete. Asphalt is more affordable than other materials, but may not last as long before needing resurfacing or replacement. It may not perform as well in hot climates—its composition and dark color make it prone to softening, which may lead to loss of structural integrity.

Chip Seal

Also called tar and chip, chip seal driveways cost $600 to $4,800 or $5 to $10 per square foot. Chip seal consists of hot asphalt and crushed stones. It’s popular for homeowners who want the appearance and durability of blacktop but have a smaller budget. Expect chip seal to last 10 years, after which it requires resurfacing to protect its integrity.

Gravel

Installing a gravel driveway averages $120 to $950 or $1 to $2 per square foot. Popular in rural areas, gravel is a low-cost option with a long lifespan. It requires regular maintenance, such as adding fresh gravel to even the surface.

Pavers

Driveway pavers range from $1,200 to $24,000 or $10 to $50 per square foot. Available in concrete, stone, brick, cobblestone, and other paving stones, these driveways carry higher costs due to material availability as well as labor-intensive and specialized installation.

Rubber

Rubber driveways cost $1,200 to $12,000, ranging from $10 to $25 per square foot. Rubber driveways are poured in place, and they’re popular among homeowners for their durability. Rubber is non-porous, meaning it requires extra consideration for drainage.

Grass

Grass driveway prices range from $1,200 to $7,200 or $10 to $15 per square foot, depending on size and material quality. Made with interlocking plastic or concrete pavers with gaps for soil and seeds, grass driveways are a unique and eco-friendly alternative to conventional driveway materials.

Design and Shape

Driveway costs can increase by 10% to 30% for non-standard designs and shapes. Rectangles and squares are common for driveways and straightforward to install. Alternative shapes, such as semi-circles and extra curves, require additional time and effort to install.

Labor

Ranging from $5 to $30 per square foot, hiring a contractor for driveway paving accounts for about 50% of driveway installation costs. Labor rates vary depending on materials and their installation requirements, particularly those that require specialized or advanced skills. For a concrete driveway, labor costs an average of $2 to $3 per square foot, while labor for an asphalt driveway costs about $5 to $7 per square foot.

Demo and Removal

If you’re replacing an existing driveway with a new installation, expect to pay an additional $250 to $3,000 or $2 to $6 per square foot for demolition and disposal. With installation, total costs average $9 to $29 per square foot. Removal costs depend on the size and accessibility of your driveway. Driveway demolition and removal includes debris disposal and regrading the site.

Permits

Permits usually cost an average of $50 to $200 for new driveway installations. Some cities or counties waive permit fees if there’s a driveway apron connecting the home to a public street.

Additional Features

There are other costs to consider when including additional features in your driveway.

Drainage

Installing culvert drainage for your driveway averages $1,500 to $5,000. Driveway culverts drain water away from your home and create a crossing from the street to your property.

Landscaping

Driveway landscaping features, such as pavers, plants, and edging, vary in cost. Depending on the landscaping complexity and materials, expect costs to range from a few hundred to several thousand dollars.

Heated Driveway

Heated driveways cost $3,000 to $25,000 or $12 to $25 per square foot, averaging $13,000 depending on the material used. Featuring warming systems installed beneath the surface of your driveway, heated driveways are advantageous for homes in cold climates and heavy snowfall.

Widening or Extending

Widening or extending your driveway provides more parking space or access for larger vehicles without the cost of all-new paving.

Widening or extending your driveway costs $2 to $15 per square foot, depending on materials and the site condition. For example, adding 200 square feet to the surface costs $400 to $3,000. Keep in mind that widening or extending your driveway may require excavation, which can drive costs higher.

Driveway Replacement vs. Resurfacing

Resurfacing averages $1 to $20 per square foot or $1,800 to $4,200, depending on the material. Resurfacing involves cleaning and repairing damage to the existing driveway, such as cracks and holes, and applying a fresh layer of asphalt, concrete, or other materials. This option is best for repairing surface issues with driveways in generally good condition and with minimal structural issues.

Resurfacing doesn’t address major structural damage or severe cracking. While more costly upfront, replacement is a better choice for driveways with significant damage and provides long-term durability and value.

Does Driveway Paving Increase Home Value?

While the return on investment varies, a new driveway can improve your home’s curb appeal and entice potential buyers. In contrast, a driveway in disrepair may put off buyers since they’ll be responsible for removing or replacing it. The total impact on your home value depends on your local market, materials, design, and installation quality.

Budgeting for Driveway Paving

Paving a driveway is a major investment, but there are several ways to keep your costs down while ensuring installation quality. Try these strategies:

Shop around for quotes: Get quotes from multiple contractors and compare their rates and included services to find the best deal.
Opt for simple designs: Stick to a simple rectangular driveway over more costly custom-shaped driveways.
Choose cost-effective materials: Select driveway materials that balance affordability, functionality, durability, and visual appeal.
Plan for maintenance: Consider ways to maintain your driveway and minimize lifetime costs, such as proper drainage and resealing.

How HomeAdvisor Gets Its Cost Data

No place is more important than your home, which is why HomeAdvisor connects homeowners with local pros to transform their houses into homes they love. To help homeowners prepare for their next project, HomeAdvisor provides readers with accurate cost data and follows strict editorial guidelines. We surveyed over 10,000 real customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.

Start Your Driveway Paving Project Today

FAQs

How much does it cost to repair a driveway?

Repairing a driveway costs $850 to $2,600. Some modifications cost as little as $300 or up to $4,500, depending on the material and the total square footage of the damaged area. Filling and sealing cracks and painting typically costs the least, while repaving represents high-end costs.

When is the best time to install a driveway?

Late spring until early fall is the ideal time for driveway installation. The warm days and cool nights during this time make it optimal for most materials to set—asphalt paving, for instance, benefits most from warm and dry conditions. Installing your driveway at the right time can improve durability.

How should I maintain my driveway?

To maintain your driveway, seal concrete every year and asphalt every few years to keep water from penetrating and cracking the surface. If there are developing cracks or noticeable deterioration, seal your driveway sooner to prevent deterioration.

How long does it take to build a driveway?

Concrete driveways usually take one to three days, while asphalt driveways take about two days. Timelines also depend on the size and complexity of the driveway. Landscaping, custom designs, and other factors may add to the total time it takes to finish the project.

How long will a driveway last?

Driveways last an average of 30 years and require regular upkeep. While asphalt and concrete need yearly or monthly maintenance, gravel driveways require maintenance once or twice yearly.