How Much Does a Pool Pump Replacement Cost in 2024?

Average Swimming Pool Pump Prices

Pool Pump Cost Factors

A few cost factors that affect pool pump installations include the type of pool you have, if you live in a remote location, if you have water features, and if you’re planning to install a timer or not. 

In-Ground vs. Above-Ground

In-ground pool pumps tend to cost more than above-ground pool pumps. This is because in-ground pumps are more difficult and time-consuming to install. You can expect to pay between $400 and $2,000 to have an in-ground pump installed, while above-ground pumps tend to range between $250 and $550 in installation costs.

Remote Locations

Though pool maintenance costs tend to be fairly consistent across the country, you may have to pay an additional $50 to $150 in installation, travel, and labor fees if you live in a particularly hard-to-access location.

Pump Type

The pump type you choose will greatly impact the total cost of your project. A simple dual-speed pump for residential use could cost as little as $400, whereas a top-of-the-line high-head pump (suitable for large or commercial swimming pools) may cost more than $4,000. 

Pump Brand

Beyond the type, the brand of pool pump you choose also influences the final price. A more budget-friendly pool pump brand, such as Harris, may cost as little as $200, while a higher-end brand like Pentair could cost up to $1,600.

Pump Upgrades

Naturally, you’ll pay more for your pump if you opt to upgrade from the one you had previously. This is because you will likely have to have additional plumbing work done in order to accommodate the new pump. Upgrading usually adds an additional $200 to $400 to your total project cost.

Labor

You’ll have to pay a local pool repair professional to install all necessary plumbing and the pump itself. Hourly rates for pool repair experts tend to range between $45 and $60 per hour, per laborer.

Water Features

Waterfalls, spas, and fountains add an element of elegance to your pool setting, but they require either their own low-head pump, which can add anywhere from $300 to $1,000 to your pool build, or you’ll need to upgrade to a high-head submersible pump that can handle complex setups. Upgrading costs up to $2,000.

Timers

A new pool pump timer adds between $60 and $200 to the cost of replacing your pump—not including the cost of labor or the pump itself. Timers ensure that your pool doesn’t run constantly and you won’t have to manually turn the pump on and off. If you’re adding a new filter as well, this could add an additional $250 to $1,700 to your total pool remodel costs. 

Pool Pump Installation Cost

Pool pump costs for labor average $100 to $400, excluding the pool pump price. The pool installation costs will automatically cover pump installation if you're putting in a new pool.

Pool Pump Replacement Cost

Pump replacement costs are typically around $900 on average, but depend on the model you choose. However, you may pay up to $9,300 for extremely large or commercial pools with high flow capacity pumps. Here are some replacement costs to consider:

• Commercial pool pumps run anywhere between $420 to $9,300

• If you opt for the same make and model, you’ll probably pay $200 to $400 less than opting to upgrade

• The added costs of upgrading often come from small modifications needed to the housing or plumbing system to make it work

• Pool repair labor rates range from $45 to $60 per hour, per worker

New Pool Pump Cost

The average pool pump costs about $900, including labor. Pool pump prices depend on the model you choose. 

• Single-speed and low-head pumps cost the least, ranging from $300 to $1,000

• Variable speed and high-head submersible models are on the pricier end, between $800 and $2,000

• Solar pumps run on solar energy and cost between $1,100 and $2,700

Cost to Replace Pool Filter and Pump

Replacing your pool pump and filter at the same time may save you a little. You could pay anywhere between $550 and $4,400 to replace a pool filter and pump, though most people won’t pay more than $3,500. New pool filters cost $250 to $2,000, not including labor.

Pool Motor Cost

A new pool motor costs $300 on average, with costs ranging from $25 to $500 for just the motor itself. If your pool pump stops working, you might only need to replace the motor instead of the entire system.

Pool Pump Motor Replacement Cost

Including labor and materials, replacing your pool pump motor usually costs between $65 and $650. You’ll spend about 75% of the cost of a new pump on replacing the motor alone. This can be a much more affordable option compared to replacing the entire pump, as long as your pump is expected to last for at least a few more years.

Pool pumps last an average of eight to 15 years. If your motor is on the fritz and your pump is more than 10 years old, it’s probably more cost-effective to get a whole new pump rather than replace the motor and then replace the whole unit shortly after.

Pool Pump Prices by Type

Single-Speed Pool Pump

Single-speed pool pump prices range from $300 to $900 for most residential installations, including labor. As the name indicates, they pump water at the same speed when turned on. As of 2021, these pumps are no longer manufactured, because they don’t meet the Department of Energy’s standards for energy efficiency.

Dual-Speed Pool Pump

Dual-speed pool pump prices range from $400 to $1,000 for most residential pools, including labor. You may pay $4,500 or more for commercial-grade pumps. As the name suggests, they run at two fixed speeds, high and low. You’ll use high speed for most filtration needs while low works best for general circulation with reduced energy costs. Most dual-speed pumps pay for themselves in energy savings within one year.

Variable-Speed Pool Pump 

Variable-speed pump prices span from $800 to $2,000 for home pools. Commercially sized pumps cost $5,000 or more. This type of pump is more expensive than your average pump, but the payoff is that it’s quieter, faster, and much more energy efficient, paying for itself within two years.

Low-Head Pool Pump

Low-head pool pumps cost $300 to $1,000 on average. They’re usually used strictly for water features, like a waterfall or fountain. They operate at low head pressures, don’t pump much higher than 10 feet, and generally need large pipes.

Medium-Head Pool Pump

Medium-head pool pumps cost $600 to $1,200 and make up the majority of pool pumps. They’re useful in general pool applications and operate at medium pressures. They’re excellent when a pool is average-sized and does not have a water feature. 

High-Head Pool Pump

High-head or high-performance pool pumps cost $800 to $2,000. They’re perfect for complex pool setups with things like a pool plus a water feature, such as a waterfall, spa, or endless edge. 

Solar Pump

Solar pumps cost anywhere from $1,100 to $2,700. They run on solar power, meaning they can save you a lot of money over time, provided your pool gets enough sunlight. Because of the high initial cost of solar pumps, they’re only recommended for pools that get at least 10 hours of direct sunlight a day.

Pool Pump Prices by Brand

Pool pumps typically range from $300 to $2,700, but can run upwards of $9,000 for high-performance pumps from high-end brands.

Budgeting for a Pool Pump Replacement

Whether you’re looking at new pool installation costs or are simply considering some minor upgrades to your current swimming pool, you know that expenses can quickly add up for these luxurious home additions. Here are a few ways to make pool pump replacement more budget-friendly:

• Invest in a variable-speed pump to greatly improve energy efficiency and reduce the future costs of your pool.

• Keep your pool covered when not in use to prevent evaporation and keep debris out, meaning your pump won’t have to run as often (costing you money and adding wear to the unit).

• Regularly skim your pool to avoid debris from getting into the pump, shortening its lifespan and causing it to use more power.

• Regularly clean (or replace) your filters and strainer baskets to prevent debris buildup in the pump.

• Experiment with reducing your pool pump’s runtime to save more money on energy.

How HomeAdvisor Gets Its Cost Data

No place is more important than your home, which is why HomeAdvisor connects homeowners with local pros to transform their houses into homes they love. To help homeowners prepare for their next project, HomeAdvisor provides readers with accurate cost data and follows strict editorial guidelines. After a project is complete, we survey real customers about the costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.