How Much Does a Wheelchair Ramp Cost in 2025?

Wheelchair Ramp Cost Factors

The budget for a standard 24-linear-foot wheelchair ramp largely depends on the ramp material, size, and type. Additional cost factors include add-ons for the ramp, such as weight specifications, landings, handrails, and special features, like a stair lift.

Size

Wheelchair ramp installation costs between $50 and $250 per linear foot, depending on the material, type, and labor rates. The longer and wider the ramp, the higher the cost. A small 4-foot ramp starts at $200, while a 32-foot ramp can run up to $8,000.

Materials

The ramp material you choose significantly affects the price. Depending on your budget and needs, you can choose from concrete, wood, aluminum, steel, prefabricated aluminum, rubber, or composite. Rubber ramps are typically the most affordable, while steel ramps often have the highest price point.

Concrete

Concrete ramps cost between $200 and $250 per linear foot. Depending on your location, you may need to factor in more for the labor costs of pouring concrete. Concrete is ideal for a permanent wheelchair ramp because it’s rough and textured. However, it’s one of the more expensive ramp materials and is difficult to remove.

Wood

Wood wheelchair ramps typically cost between $100 and $250 per linear foot to install. It is important to add weather protection and slip prevention for rain and snow. If a wooden wheelchair ramp is not regularly maintained, it can become unsafe over time due to warping or rot.

Aluminum

The average aluminum wheelchair ramp costs approximately $150 to $200 per linear foot. Aluminum is one of the top material choices because it's strong, lightweight, and corrosion-resistant. The grooved surfaces typically found on aluminum ramps help with traction in rainy and snowy conditions.

Steel/Metal

Steel is one of the most expensive and secure wheelchair ramp materials, at $200 to $250 per linear foot. Opt for galvanized steel to avoid rust and corrosion, and find a ramp with a textured surface to prevent slippage.

Prefabricated Aluminum

Prefabricated aluminum ramps cost around $100 to $150 per linear foot, making them a great budget-friendly option. Contractors can quickly assemble and install the prefabricated model, helping you save on labor costs.

Rubber

Rubber wheelchair ramps cost about $50 to $150 per linear foot, so they're the way to go if you're building a wheelchair ramp on a budget. They’re naturally slip-resistant, making an excellent choice for indoor shower ramps. However, their durability is low, so rubber is only considered for small ramps.

Composite

Composite wheelchair ramps range from $150 to $200 per linear foot. Composite's biggest selling point is its moisture resistance. You don’t need to worry about warping, rotting, or impact damage over time. 

Ramp Type

The type of ramp you choose also affects the total cost of your project. Mini or portable ramps are the most cost-effective, while sturdier options, such as semi-permanent, modular, and permanent ramps, are on the other end of the spectrum. 

Mini-Ramp

Mini ramps are the most budget-friendly, costing between $100 and $200. They’re typically 30 inches wide by three feet long and designed to allow passage over a raised threshold or between split levels up to a height of about one stair step. Most are made of aluminum, making them lightweight and easy to transport.

Portable

Portable ramps are available in lengths of three feet to 10 feet and cost between $100 and $2,000, depending on the type. Typically used for getting into automobiles or slightly elevated entranceways, portable ramps can’t access more than two vertical steps due to their limited length. For example, a 5-foot ramp can only rise five inches per ADA guidelines. Portable ramps can also be challenging to set up and take down without assistance.

Common types of portable ramps and their general costs include:

• Folding: $100–$1,000; also called suitcase or multifold; one or more folds for portability

• Roll-up: $300–$1,300; made of aluminum; can be rolled up for storage

• Track: $250–$2,000; have two tracks that line up with the wheelchair; can be folded or opened to the optimal length

Modular

Modular wheelchair ramp prices start at $400 but can reach $5,000 for longer models. They're prefabricated, meaning a contractor needs to assemble the pieces when they arrive. Modular ramps are usually made of aluminum or steel and are generally low-maintenance. Before ordering, make sure to calculate the measurements correctly.

Semi-Permanent

Semi-permanent wheelchair ramps cost anywhere from $350 to $2,000 to install. Though they aren’t anchored to the ground permanently, they’re still stable and safe. A semi-permanent ramp can be a good option if you don't need the ramp to stay in place for multiple years.

Permanent

Permanent ramps are typically made of concrete, wood, or steel and cost between $1,000 and $6,000. They’re often installed at a home's entry and exit points.

Weight Specifications

In general, the stronger the ramp, the more expensive it will be. Some ramps are designed for manual wheelchairs, while others are for heavier electric scooters or wheelchairs. Some may only support the weight of an unoccupied wheelchair. 

Landings

All wheelchair ramps require flat landings at the top and bottom, allowing doors to open smoothly and for wheelchair users to stop and rest.

Landings should be installed for every 30 inches of rise. Additional landings beyond the top and bottom can increase the overall installation price.

Handrails

Larger ramps require handrails and guards. For example, ramps that rise over six inches or are greater than six feet long require handrails on both sides.

Prefabricated kits may come with handrails, but you'll need to factor in additional costs if a contractor builds a ramp with raw materials like wood or metal.

Grip Strips or Tape

If you’re building a ramp out of metal or wood, budget for additional materials to prevent slippage. A 2-by-60-inch roll of anti-slip grip tape costs $15 to $35 at a local hardware store.

Other Wheelchair Ramp Cost Factors

Several other factors, such as labor, permits, location, and additional features, must also be considered when installing a wheelchair ramp.

Labor

The hourly labor rate to hire a local professional wheelchair installer depends on the ramp you're building. For example, a wooden ramp requires a carpenter, but a concrete unit could require a mason. 

Carpenters cost around $35–$100 per hour, while a handyperson costs around $60 to $65 per hour. If you need to hire a mason for pathway installation, expect to pay around $1,800 to $4,800 per project. Any contractor you hire should be licensed and familiar with ADA regulations.

Permits

Check with your local building office before beginning your project to see if they require a permit. If so, expect to pay between $30 and $120 for the building permit cost. The contractor you hire may handle the permit process for you.

Location

The ramp location can often impact the price. Outdoor ramps are usually longer and require more durable materials, while indoor ramps need to be shorter and more portable. A typical indoor ramp may range between $200 and $2,000, while an outdoor ramp generally costs $1,200 to $5,000.

Additional Features

Often, a wheelchair ramp installation makes up just one of many disability accommodation remodeling costs. Depending on your home and needs, you may also need to budget for additional features, such as stair lifts, elevators, and doorway widening.

ADA Requirements

Before installing a ramp, familiarize yourself with the U.S. Access Board’s ADA requirements for wheelchair ramps. Homeowners legally don’t need to comply with guidelines, but meeting them is in the best interest of anyone in your home who uses a wheelchair.

Here are some critical points to keep in mind:

• For every one inch in height, there should be one foot in length. This is the maximum slope permissible.

• Ramps should be at least 36 inches wide.

• Runs shouldn’t exceed 30 feet (30 inches in height) without a landing somewhere between the top and bottom.

Calculating the Slope and Length

The slope is the most critical safety concern when designing a ramp. For a permanent fixture, use the lowest slope possible, no more than one inch of rise per one foot of length.

To estimate the length needed, measure the height in inches and convert the inches to feet. For example, a ramp that rises 30 inches must be at least 30 feet long, not including the landings.

Insurance and Financial Assistance

In some cases, financial assistance may be available for people with disabilities who need a permanent or modular unit.

Medicare

According to Medicare policy, disability ramps are considered durable medical equipment (DME) and are fully reimbursable if used for medical purposes. However, a licensed physician must deem the structure medically necessary.

Alternatively, Medicare Advantage (MA) plans might cover wheelchair ramp costs for eligible people with certain chronic conditions, including Alzheimer's disease, rheumatoid arthritis, and metastatic cancer.

Medicaid

Medicaid is a federal program administered by the states, so policies vary. In many states, Medicaid follows the same guidelines as Medicare and will only reimburse the costs of a wheelchair ramp if a physician deems it medically necessary.

In some states, low-income older adults and people with disabilities can pursue assistance via standard Medicaid or Home and Community-Based Service Waivers (HCBS Waivers). With these, ramps are considered home modifications covered fully or partially.

Older people may also be qualified for the Money Follows the Person Program, which provides financial assistance for those transitioning from a nursing home to a personal residence that needs modifications. Again, this option is only offered in some places, so check availability with your state.

Veteran Assistance

Veterans may qualify for the U.S. Department of Veterans Affairs Cash and Counseling benefit. Qualified veterans receive a care budget to select the necessary services and supplies. Any money spent outside of that budget is paid out of pocket.

Veterans may also be eligible for VA Home Improvement and Structural Alterations Grants (HISA Grants). These grants help make home modifications to improve accessibility. Those whose disabilities are military service-related may qualify for up to $6,800, while those with disabilities not related to their time served may receive up to $2,000.

Other Assistance

Other financial assistance options include state-based assistance, older adult care loans, and nonprofit assistance. Their availability varies by location.

Wheelchair Ramp Rental Costs

For short-term needs, wheelchair ramp rental costs between $100 and $280 monthly. The initial installation requires a one-time charge of about $300 to $800. The cost of rental and installation depends on the specific configuration needed. Typically, the longer the ramp, the higher the rates. Many rental companies allow you to use a portion of the rental fee toward a future purchase if you need a ramp permanently.

Budgeting for Installing a Wheelchair Ramp

Wheelchair ramps are an essential tool for those with limited mobility. While insurance and grants can help cover the costs, you can also save money with the following tips:

• Choose a cost-effective option, such as rubber, to minimize the price of materials.

• Opt for a prefabricated kit to keep the cost of labor and materials low.

• Check your insurance before you begin. Your provider may fully cover the project.

• The larger the ramp, the more you’ll pay. To keep costs down, choose the smallest size possible.

• Check with local nonprofits for assistance or discounts on medically necessary wheelchair ramps.

How HomeAdvisor Gets Its Cost Data

No place is more important than your home, which is why HomeAdvisor connects homeowners with local pros to transform their houses into homes they love. To help homeowners prepare for their next project, HomeAdvisor provides readers with accurate cost data and follows strict editorial guidelines. After a project is complete, we survey real customers about the costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.